how to upload from chirp to your radio
It makes sense that your handheld radio should be able to take the identify of multiple radios.
Want to add all the channels you need quickly and easily? Let'south program a Baofeng UV-5R Radio with CHIRP software to become the job washed.
Program a Baofeng UV-5R Radio with CHIRP
The Baofeng handheld radios are inexpensive just comprehend many frequencies, making them the Swiss Ground forces Knives of the budget ham radio community.
We're going to program a Baofeng radio with CHIRP software . CHIRP is complimentary open source software anyone can download.
It's used for programming a wide range of amateur radios of unlike makes and models, and in multiple formats and information sources. It offers an easy to use interface uniform with Windows, Mac, and Linux PC's.
The BaoFeng UV-5R, is an astonishing, yet economically priced radio. It can comprehend a multitude of channels and frequencies. In this post westward
The Bands Covered (Not all of these are legal to broadcast on, but listening should exist fine – see FCC Part 95 Rules)
- two Meter
- 70 cm
- FRS (Family Radio Service)
- GMRS (Full general Mobile Radio Service)
- MURS (Multi-Apply Radio Service)
- Marine VHF
- Public service Frequencies
- NOAA Weather Ring
- FM radio (listen but)
That is quite a list of frequencies. While it'due south non legal to transmit on all these frequencies if you are non a HAM or if the device isn't approved on the FCC Part 95, that really won't apply after SHTF. I'd take an FCC fine over death any solar day!
Preparing to Programme Your BaoFeng
Software
I recommend CHIRP, to program your BaoFeng, and then this postal service will refer to that software. CHIRP is available for Windows, Mac Os and Linux, and so regardless of your operating system, you are covered.
Download the version you demand and install it.
Programming Cable
Before you can program your radio with CHIRP, yous'll need the BaoFeng USB programming cable.
Exist sure yous buy a cablevision from a reputable dealer and non a cheap knock off, or you will risk frying something.
I recommend the to a higher place cable since information technology is sold by BaoFeng and works great with the included FTDI chipset.
This cablevision is plug'north play and should not crave separate drivers, just another option is to download the drivers over at Miklor.com, (an awesome BaoFeng informational page).
Download and install the proper drivers for your USB cable (probably Prolific).
Programming Your BaoFeng
Step 1
Open up/Run CHIRP, connect your BaoFeng and plug information technology into an USB port on your calculator.
Starting time y'all'll need to pull a copy of the existing config from your radio to your figurer.
In CHIRP, select RADIO > Download From Radio
You'll demand to requite CHIRP some information about your radio and what COM Port (or which /dev/XXXX in Linux and Mac Os) it'south continued to.
Once this pace has been completed, information technology should list any channels that you have already programmed into memory.
Side Tip: If you are using a UV-5R variant go on in mind this configuration setting volition embrace a number of the variants (such as UV-5RE Plus).
If there is confusion on this, you tin can find which models are covered and which y'all should selection on the CHIRP website.
Step ii
Now in CHIRP go to FILE > Open Stock Config and Select the group of channels that y'all'd like to add together to your BaoFeng (This seems to be missing on the Mac Bone version of CHIRP, fear non, I've included about of these "channels" in baofeng-freqs.csv )
In this screenshot, I accept opened Marine VHF Channels
You tin select the channels or all channels using the hot-fundamental combinations for your OS
Windows (and nearly Linux systems unless you've remapped stuff)
- Select all = CTRL + A (keys on your keyboard)
- Select individual Channels = CTRL + mouse click
- Select Range of Channels = Mouse click to highlight starting time then, SHIFT + mouse click on the terminal in the range that yous'd similar to select
And so CTRL + C (or EDIT > Re-create ) to re-create the selected channels
Side Tip: To import from other data sources other than from the stock config, become to Radio from the radio drop downwards and select Import from other data sources.
Some options available may be RadioReference.com, RepeaterBook, RFFinder, etc. RepeaterBook is the easiest way to import repeater info for your location.
Stride 3
Switch dorsum to your BaoFeng Tab
Click on the first unoccupied aqueduct and then select EDIT > PASTE (or CTRL + V) to paste in the previously copied channels from the Stock Config into your Radio's Config
Step 3-A
If you lot you don't have enough channel slots, y'all can add more (Baofeng supports up to 128 memory channels, 0-127)
This is how my BaoFeng Config looks after adding FRS, GMRS, MURS, Marine VHF, and NOAA weather (Note: channel 0 is not programmed and channel i is my local HAM club'south repeater)
Side Tip: Since it is illegal to transmit from a BaoFeng using FRS and GMRS merely you still wanted to import those channels for receiving, you can disable manual capabilities.
To proceed, click (none) nether the Duplex cavalcade for frequency you lot want to disable TX. And then select off from the drop downward box.
This will ensure you never accidentally TX on these channels, while all the same assuasive y'all to receive.
Step 4
At present you only have to upload this config back to your radio. Select RADIO > Upload to Radio and CHIRP will write information technology to your BaoFeng'southward retention.
Apply the same configuration settings that were used during the initial clone (we did above). You'll run into receive light instead of a send indicator calorie-free.
To verify the radio is programmed, switch to Channe/Memory mode, so go up to A frequency and you lot should be able to scroll through and view the frequencies you added.
Culling Options for the non-nerdy
- You notwithstanding need to do Step 1 (download your radio'due south config) above
- Download this config (minus my Local Repeater): baofeng-freqs.csv
Retrieve where you downloaded this file to (Desktop?). - Perform Step 3A to suit the number of channels, y'all'll demand to set this to sixty or 61.
- And then in CHIRP Select FILE > Import and import that baofeng-freqs.csv file that yous merely saved someplace (I told you lot to remember where yous saved it)
- Now do Step 4 from above to write this config to your Baofeng
At present your trusty BaoFeng UV5R has all the FRS, GMRS, MURS, Marine VHF and NOAA weather channels programmed in it and you lot withal have 68 channels left for your 2 Meter and 70 cm frequencies.
I suggest that you pick upwards a copy of the ARRL Repeater Directory and programme in some of the repeaters in your expanse!
Hopefully, this guide has helped you lot program your BaoFeng using CHIRP and you are left with fewer questions and more knowledge.
Source: https://geekprepper.com/program-a-baofeng-radio-with-chirp/
0 Response to "how to upload from chirp to your radio"
Post a Comment